WEEKLY PMCS

Lubricate all grease fittings — front and rear axles, driveshafts, steering linkage, LHS pivot points per lubrication order

Check power steering fluid level and inspect hoses for leaks or chafing

Inspect steering gear box for leaks and mounting bolts for tightness

Check wheel bearing play on all 10 wheels — no excessive looseness or roughness

Inspect leaf springs — no broken leaves, missing U-bolts, or loose spring hangers

Check shock absorbers for leaks, damage, or loose mounting hardware

Inspect brake drums and linings on all axles — minimum 1/4 inch lining remaining; no cracks in drums

Check automatic slack adjusters — must maintain proper brake adjustment; replace if not self-adjusting

Inspect LHS hydraulic system — check all lines, hoses, cylinders, and fittings for leaks or chafing

Lubricate LHS hook arm pivot points, rollers, and guides per lubrication order

Inspect flatrack locking pins and pin housings — no cracks, wear, or missing hardware

Inspect battery — clean terminals, check hold-down, check electrolyte level in all cells

Check alternator belt tension and condition — 1/2 inch deflection; no cracks or fraying

Inspect radiator and surge tank hoses — no soft spots, cracks, or swelling

Check air intake system — air cleaner housing, ducting, and connections for leaks or damage

Check fuel filter for water or sediment — drain water separator if equipped

Check pintle hook — no cracks, proper mounting, latch engages and locks; lubricate pivot

Check tow hooks and lifting eyes — no cracks, proper mounting, no deformation

Check NATO slave receptacle — cover in place, no corrosion on contacts

Inspect fire extinguisher (portable) — pin in place, gauge in green, no damage

Check vehicle records — DA Form 5988 current; all open faults annotated