DURING OPERATIONS PMCS
Monitor these items while the vehicle is operating. Stop immediately if any NFMC condition is observed.
Enter your info first. Green OK, red NFMC. Print when done.
Monitor engine temperature gauge — must stay in normal operating range; stop if approaching red zone
Monitor oil pressure gauge — must show pressure within 10 seconds of startup; minimum 10 PSI at idle
Monitor air pressure gauges — primary and secondary circuits must maintain 100–120 PSI during operation
Monitor voltmeter — must show charge; investigate if showing discharge or battery warning light illuminates
Check for unusual engine noises — knocking, rattling, or excessive exhaust smoke
Monitor steering response — no excessive pulling, binding, or loss of steering control
Check brake performance — vehicle must decelerate smoothly; no pulling, grinding, or fade
Monitor CTIS — system must maintain selected pressure; investigate if pressure drops during operation
Monitor fire suppression system warning lights — any illumination requires immediate investigation
Monitor transmission temperature — must stay in normal range; no slipping or harsh shifts
NFMC — No Further Movement Criteria. Any fault on an NFMC item means the vehicle is non-mission-capable and must not be dispatched until repaired. Annotate on DA Form 5988 immediately.
Complete all items above to unlock printing
Share this checklist
Send your Soldiers the Stryker During Operations PMCS — they open the live checklist, not a PDF.
Spot something off?
Wrong item, missing step, TM discrepancy — tell us. Every report helps keep this accurate for the formation.
No login needed.